Apr
26

Nipple Rings: Sizing and Style Overview

By

With so many different options out there, sometimes it's hard to figure out the sizes that should be purchased when searching for new items, especially when it comes to nipple rings.  Well fear not, body jewelry enthusiasts, because we're about to make it all clear.

The first thing to decide is what type of item you're looking for.  There are many pieces of jewelry that can be worn in a nipple piercing, so to save some time, we'll cover here the four most common types.

 

Style 1: The Nipple Bar

Standard Nipple Bars

Nipple bars are just a straight piece that goes through the piercing and is tipped on either end with a gem or ball; these are basically a standard barbell, but are normally tipped with crystals or embellishments facing out so they can be seen from the front. 

 

Style 2: The Standard Nipple Ring

Standard Nipple Ring Style

What most of us refer to as a "nipple ring" is really just a nipple bar with some type of dangle or hanging decoration.  These will be sized (for the most part) as you would size a nipple bar.  Unless the attached ends of the dangle are extremely thick, barbell length will be the main focus of sizing here.

 

Style 3: The Horseshoe Ring

Horseshoe Nipple Rings

This is just a curved barbell in the shape of a horseshoe will a ball at each end to hold it in place.  Horseshoe rings can be a tad trickier to size, as the main focus for proper fit will be the diameter of the ring.  Once you know what to look for though, this item makes a simple and stylish addition to your jewelry wardrobe.

 

Style 4: The Nipple Shield

Standard Nipple Shield

The most difficult to size of all nipple jewelry, these items will need a measurement for barbell length AND opening diameter of the "shield" decoration, which will normally have a circular center or some type of widened opening.

 

 

So now that we're familiar with the main types of jewelry, let's get down to business. 

The first thing to look at when sizing a nipple ring of any type is gauge size: the thickness (diameter) of the "post" or barbell piece that goes through the actual piercing and comes out the other side.  This part should be easy because there's generally very little variation in the needle size used to pierce this area.  The majority of nipple rings will be a 14 gauge, which is about 1.6 millimeters in diameter.  This is about the same size as the average belly ring or labret piercing, though these items appear very different. 

Occasionally due to the way a piercing heals a slightly smaller 16 gauge will be needed, so be sure to find out what gauge you require as this above all will insure a comfortable fit. 

Janet Jackson Style Sun Nipple Shield

Janet became famous for her Super Bowl slip,but the fans have spoken, and they love the look.  Want to copy Janet Jackson's super-sweet tribal sun?  Get the goods here:  Sun Nipple Shields

 

Next for bars, standard "rings," and nipple shields, the length of the straight barbell will be important.  The standard length for these items is 16 millimeters, or 5/8 inch, but the best way to be sure that you won't need something smaller is to measure what you currently wear, or have your piercer measure for you.  For a proper length measurement you will need both ball tips to be screwed into place on the barbells ends, and then measure the length of barbell BETWEEN the two tips.  Approximate size of steel or acrylic balls should not be included in the length measurement.

When measuring a horseshoe ring or nipple shield, diameter will always be measured at the widest point, directly across the opening.  Due to variance in sizing needs from person to person, shield and ring opening diameters will generally come as small as 8 millimeters and go up from there to as large as over half an inch.  If buying your first shield, it's advisable to check with your piercer for sizing recommendations.  The piercer will be able to listen to how you want the item to fit, show you what these items look like when worn, and let you know what size diameter you should be looking for to get the look you desire.

Nipple Shield Diameter

 

Other types of items that can be worn in the nipple piercing include the captive ring (sized by diameter and gauge), the invisible nipple bar (sized like a standard nipple bar), and the nipple chain for persons who have both nipples pierced.

 

Ball Captive Rings Invisible Nipple Rings Pierced Nipple Chains

 

For more handy info on jewelry sizing, check out the rest of our Jewelry Sizing category.

Comments

  1. Francisco Wallenbrock says:

    Hello; great article. Your publishing has very good quality. I need very good posts like yours at my website. Nice job.

  2. Colby Trimarchi says:

    It is tough to find people who are educated on this topic, but you seem like you really know what you’re talking about! Thanks

  3. chicago ray says:

    Good post. Saved on delicious :)

  4. Kandi says:

    yeah. this is really nice. it took me such a long time to figure out how to measure and get the right size shields. where was this two years ago? lol just kidding. great though.

  5. Tilda says:

    I still haven’t found any that fit exactly perfectly , but this is a great jumping off point.

  6. kevin hoover says:

    WOW guys this helps out a lot since my girlfriend has large nipps “witch is great :)
    but she is not real sure that she wants them pierced. But i think there sexy as get out !!! she is a little scared to have it done, thinks it might hurt too much but yet she has her girly parts pierced go figure lol
    but with the rite size and style i mite be able to talk her into having both of them done !!!
    THX FOR THE HELP
    Kev

    • me says:

      if she hasnt yet i was same way on both ends lol tell her its not as bad as getting the other done honest. and deffinently get both done at once so they are both healed at same time. :D love mine now that i did it. hope she will too

  7. Lisa says:

    My bf is an instrument maker and made special nipple rings for me. They are huge !
    inside diameter is 1 1/2 inch and they are 3/8 thick. I had to stretch the holes to accomodate them !
    I can easily put a ball pen through them now.
    I love to wear those rings. It turns me on to wear them and it turns my bf on too !
    He wants to make them so that they can be closed for good, so i can’t remove them.
    In time I want more rings in other sexy places.

  8. Tempus says:

    I do have a question. I know that most start out with bars when first getting pierced, but I heard that you should only wear decretive bars or shields for occasions rather than everyday wear.

    Is this true?

    I’m looking to get mine done and would love the silver rose or sword set, but would rather have it for everyday wear than the plain barbell once they’ve healed.

    Thanks

    • Lorna says:

      A lot of it really depends on preference. As a general rule it’s a bad idea to wear items with intricate shields or dangling pieces for long periods of time because of the risk of the pieces getting caught on clothing and such, but there are people who’ve had long-term success with jewelry that incorporates simpler embellishments. Regular bars or circulars with solid balls are definitely the standard for initial piercing though. The best way to figure out exactly what your options are is to ask the piercer that you plan to go to. They’ll always have educated answers and probably also a professional opinion, plus, information is always free. Good luck with your new modification venture! ;)

Leave a Reply